Backflow Prevention Testing Independently Qualified Person (IQP) Backflow tester and installer

KD Plumbing is a trusted backflow prevention company serving the North Shore area in Auckland. KD Plumbing can supply, install, test and then certify backflow prevention valves for multiple industries including hospitality, healthcare, commercial, and domestic customers.

What is Backflow?

Backflow is an unwanted reverse flow of contaminated water into the main pipeline or plumbing system from a residential or commercial plumbing system. Cross-contamination will occur when the contaminated water comes into contact with the main potable water supply. To stop a cross connection a suitable backflow prevention device needs to be installed. Cross contamination is extremely hazardous to the main supply of water, so this is extremely important to be done correctly.

Our backflow prevention services include:

  • Supply and installation
  • Testing and certification
  • Valve protection and vandal deterrents
  • Maintenance and repairs
  • Audits and reports
  • Backflow prevention system design

KD Plumbing backflow prevention methods can vary according to the industry, site and job. We are qualified and experienced in backflow prevention so can advise you on the best method of backflow prevention for your situation.

Our backflow prevention methods include:

  • Air gap
  • Break tank
  • Double check valve
  • Reduced pressure zone device
  • Pressure vacuum breaker
  • Single check valve – Testable
  • Double check valve detector assembly
  • Reduced pressure zone detector assembly
  • Single check valve detector assembly

Some properties that may require a backflow prevent test include:

  • Restaurants
  • Cafes
  • Shops
  • Unit and apartment complexes
  • Medical and dental facilities
  • Swimming pools
  • Residential properties
  • Caravan parks
  • Production / manufacturing facilities
  • Piers, docks, and waterfront facilities

Annual testing services

KD Plumbing can look after your testing and certification requirements. Each backflow prevent device is required to be tested and certified annually or after any repairs have been done to the pipework. We can also prepare the documentation to lodge with the local council. Maintenance or repair work will also be carried out if required.

Hazard rating of sources

The hazard rating of the source of contamination will determine what type of backflow preventions device is required. For example, a hose tap that is located in a trash bin washing bay on a commercial or industrial property has a high hazard rating, therefore you will need to install a RPZ backflow device. Another example is a residential property that has a rainwater tank below ground which is connected to the water supply will need a medium hazard rated device which could be a double check valve. KD Plumbing can advise you on the required backflow prevention device depending on your hazard rating.

Devices are required for the following to protect against potential contamination:

  • Irrigation systems
  • Vehicle washing bays
  • Fire hose reels
  • Fire systems
  • Cooling towers
  • Grease traps
  • Rubbish bin washing bays
  • Chlorinators
  • Underground rainwater tanks

When you need a trusted IQP Plumber to carry out backflow testing look no further than the experts at KD Plumbing. Contact our team on 0210468037.